Sound / Dante network map

The auditorium Dante network runs two planes: Dante A = 192.168.10.x (primary) and Dante B = 192.168.11.x (secondary/redundant). It’s auditorium-only (see Sound). Devices with dual IPs are on both planes.

Device	Dante A	Dante B
NION (M21)	192.168.10.100 ✓	192.168.11.100
NION Cab4N card — M21	192.168.10.101	192.168.11.101
NION Cab4N card — FOH	192.168.10.102	192.168.11.102
dLive MixRack	192.168.10.103	192.168.11.103
Beyerdynamic TG 1000 web interface (mic status)	192.168.10.104 ✓	—
Beyerdynamic wireless 1/2 – 11/12	192.168.10.110–.115	—
FOH Sound PC	192.168.10.150 ✓	192.168.11.104
Recording PC	192.168.10.154	—
Projection Mac Studio	192.168.10.155	—
Video	192.168.10.14 ✓	—
Router	192.168.10.254 ✓	—

✓ = responded to a live ping from docker-server. The rest are from the network workbook and weren’t confirmed live (most audio gear was powered down at capture) — a follow-up will re-run this with everything on.

• The Beyerdynamic wireless receivers are the mic RX that feed the dLive MixRack over Dante (AV room right).
• The TG 1000 status page is http://192.168.10.104/ (SOUND-PC keeps it in Edge’s favourites bar). It lets one user in at a time; anyone else gets “403 Forbidden — Devices already in use by someone else”. The receivers’ own Dante addresses (.110–.115) have no web server.
• The AMX N4321 audio transceivers bridge SVSI/Dante audio and hang off the M21 switch (they appear as the “Audio Transceiver 1/2/3” SVSI endpoints).
• Dante B (192.168.11.x) isn’t reachable from docker-server; confirm onsite.